Check my picture for how I installed this. Couple of installation tips. First off this is threaded for 3/4", which I used, but if you need to, you can buy reducers and reduce down to 1/2" or whatever size you need. Also it is best to install this as far away from your compressor as your installation allows. You can google the why's of that, but in my case it is about 50 feet away from my compressor. It should also be installed BEFORE your regulator. This keeps dust, dirt, and water out of it and quite frankly it says on my regulator that this needs to be installed this way or it voids the warranty. You will also notice the sticker I installed that says " Do not open under pressure" , that is just a reminder to myself not to try and do so.
Onto the unit itself. It is very well built and seems to be performing well. I have 175 psi going through it with no leaks. Any complaints of leaks are probably due to bad installations. Take your time, clean the treads and use tape AND some sort of pipe sealant and leaks shouldn't be an issue. I'm very pleased with this and I can see this lasting me a very long time.
| Manufacturer | T-H-B CO EDGE INDUSTRIAL |
|---|---|
| Part Number | F706N |
| Item Weight | 5 ounces |
| Package Dimensions | 8.8 x 4 x 3 inches |
| Item model number | LM9000 |
| Is Discontinued By Manufacturer | No |
| Style | 3/4" NPT, 5oz |
| Material | Aluminum |
| Maximum Power | 0.2 Horsepower |
| Item Package Quantity | 1 |
| Number Of Pieces | 1 |
| Air Flow Capacity | 140 Cubic Feet Per Minute |
| Maximum Pressure | 215 Pound per Square Inch |
| Measurement System | English/Standard |
| Mounting Type | WALL MOUNTING BRACKET |
| Usage | COMPRESSED AIR |
| Included Components | filter |
| Batteries Included? | No |
| Batteries Required? | No |
